Fixtures for medical device lines,
made in Costa Rica
We design and make assembly nests, curing fixtures, inspection fixtures and go/no-go gauges. Send a photo, a drawing or the part. We send you a design and a printed sample.
*Machined metal parts: we send you a quote for the sample in 24 hours. The quote gives the lead time that the partner machine shop confirms.
WhatsApp +506 8886 9436 · andres@altavia-manufacturing.solutions
Typical parts
These parts locate, hold or check the product at each station. We design them against your part or your drawing.
Assembly nests
A nest seats the component in the same position in each cycle. The result does not depend on the operator.
Bonding and curing fixtures
They hold the parts in position while the adhesive cures. We leave the access that your lamp or tool needs.
Inspection fixtures
They locate the part from the same datum each time. You can measure by hand or under a camera.
Go/no-go gauges
They check one critical dimension at the station. They need no measuring instrument.
Packaging and sealing tooling
Nests and supports for trays, sealers and packaging stations. We size them to your product.
Gripper fingers and supports
Fingers for robots and manipulators. TPU contact surfaces do not mark the part.
| Printer | Bambu Lab P2S (enclosed, hardened-steel nozzle, max nozzle 300 °C) |
| Max printed part | 256 × 256 × 256 mm. We make larger parts in sections, by agreement. |
| Printed tolerance | Printed parts: ±0.2 mm general. Critical features: ±0.1 mm after a test print, or by reaming or machining the feature. |
| Machined tolerance | Machined parts (partner machine shops): ±0.05 mm standard. Tighter tolerances, to ±0.01 mm (CNC and wire EDM), on request. We confirm the tolerance for each part in the quote. |
| Measurement | We measure critical dimensions with calibrated calipers and micrometers. We send you the values with the sample. |
Common problems
The fixture comes from abroad and takes weeks
Quote, payment, shipping and customs hold up a start-up or a model change. We design and print in Costa Rica.
The product changed revision and the fixture no longer fits
We change the design and print a new sample. A change of geometry does not need a new mold.
Each operator positions the part in a different way
A well-designed nest allows one position only.
The first sample
The first sample is the fixture, nest or gauge printed in the material that we recommend. We compare it with your part or your drawing. You test it at the station and tell us what to adjust.
If you need a metal version, we quote it through a partner machine shop.
With each sample: the drawing, the material and its data sheet, and the measured critical dimensions.
Printed fixtures are for use outside the sterile product zone, unless your QA approves the material. We give you the material data sheet for your assessment.
A fixture is process equipment. Your quality team owns the validation (IQ, OQ and PQ). We do not claim any quality system certification.
Send us the fixture drawing
Send a photo, a drawing or the part.
Andrés Guzmán · WhatsApp +506 8886 9436 · andres@altavia-manufacturing.solutions