Fixtures and jigs for
precision manufacturing
We make machining fixtures, drill and assembly jigs, inspection gauges, soft jaws and prototypes. We print engineering plastics. Partner machine shops make the aluminum and stainless steel parts.
*Machined metal parts: we send you a quote for the sample in 24 hours. The quote gives the lead time that the partner machine shop confirms.
WhatsApp +506 8886 9436 · andres@altavia-manufacturing.solutions
Typical parts
Tooling to machine, drill, assemble and inspect. We design it against your geometry.
Machining fixtures
Workholding and datums for your part. We test the fit in plastic. We then move to metal if needed.
Drill and assembly jigs
They guide the tool or locate the components.
Inspection gauges
Go/no-go gauges and measurement supports for critical features at the station.
Soft jaws
Jaws shaped to your part. They hold the part without marking it. We make them in plastic or aluminum.
Functional prototypes
Parts to test form, fit and assembly before you pay for metal machining.
Metal tooling through partner machine shops
Aluminum and stainless steel parts. We quote them with the lead time that the shop confirms.
| Printer | Bambu Lab P2S (enclosed, hardened-steel nozzle, max nozzle 300 °C) |
| Max printed part | 256 × 256 × 256 mm. We make larger parts in sections, by agreement. |
| Printed tolerance | Printed parts: ±0.2 mm general. Critical features: ±0.1 mm after a test print, or by reaming or machining the feature. |
| Machined tolerance | Machined parts (partner machine shops): ±0.05 mm standard. Tighter tolerances, to ±0.01 mm (CNC and wire EDM), on request. We confirm the tolerance for each part in the quote. |
| Measurement | We measure critical dimensions with calibrated calipers and micrometers. We send you the values with the sample. |
Common problems
Each revision of a metal fixture costs time
We test the geometry on a printed sample. After you confirm the fit, the metal version goes to machining.
A special fixture or jaw is late
Depending on the part, a printed sample can do the work while the metal part is in the shop.
You measure or machine the part from a different datum each time
A fixture with clear datums holds the part from the same points each time.
You need a few parts, not hundreds
We work in small batches.
The first sample
We print the first sample in the engineering material that we recommend. We use the datums and tolerances that you mark on the drawing. You test fit, tool access and ergonomics.
If you need aluminum or stainless steel, we ask a partner machine shop for a quote. We give you the lead time that the shop confirms.
With each sample: the drawing, the material and its data sheet, and the measured critical dimensions.
For a first order, we can supply printed fit-check fixtures and jigs. We can supply metal tooling through partner machine shops, with material certificates from the shop when available. We measure the critical dimensions and send you the measured values.
We do not have AS9100 certification. We cannot handle ITAR-controlled drawings. If your drawing has export control restrictions, contact us before you send it.
Send us the drawing
Send the drawing or the part. We tell you what we make in plastic and what in metal.
Andrés Guzmán · WhatsApp +506 8886 9436 · andres@altavia-manufacturing.solutions