⌁  Electronics · Costa Rica

Test fixtures and supports
for electronics lines

We make test fixtures, PCB carriers, cable and harness boards, and pick-and-place nozzles and grippers. We make ESD-safe parts on request. Send a photo or a drawing.

First sample free in 72 hours*Printed parts. Delivery is free in the Greater Metropolitan Area (GAM, San José area).

*Machined metal parts: we send you a quote for the sample in 24 hours. The quote gives the lead time that the partner machine shop confirms.

WhatsApp +506 8886 9436 · andres@altavia-manufacturing.solutions

Typical parts

Station parts for test, assembly and component handling.

Test fixtures

They hold the board or module and align the contact points. They are ESD-safe when the process requires it.

PCB carriers and supports

They hold boards during assembly, inspection or transport between stations. We size them to your panel.

Cable and harness boards

Boards with guides, clips and marks. Each harness gets the same routing and length.

Nozzles and grippers

Nozzles and fingers to pick irregular or delicate components. We choose the contact material for the component.

Assembly and labeling guides

Jigs that position labels, connectors and housings. You do not measure each time.

Trays and guards

Trays with part pockets, and guards for the station. We shape them to your parts.

Common problems

The station is ready and the fixture is missing

We send you a design and a printed sample. You can test the station without a shipment.

The plastic support can build up static

We print in ESD-safe PETG on request. We agree the required resistivity with you before we print.

You have many board models and few parts of each

We make small batches for each model. We keep the design on file to repeat it.

Each builder routes the harness in a different way

A board with guides gives the same routing and length to each builder.

The first sample

We print the first sample in the agreed material and fit it to your PCB or harness. If your process needs ESD-safe material, say so in your first message.

The test at the station shows if we refine the design or move to production. If you need metal parts, we quote them through a partner machine shop.

With each sample: the drawing, the material and its data sheet, and the measured critical dimensions.

Send us the board or harness

Send a photo or the drawing of the board or harness.